Line 04 · Motion Platform
6 DOF motion simulator (YT-6DOF)
The flagship six-axis base in two frame sizes: the standard YT-6DOF at 800 kg and the YT-6DOF-Pro at 2,000 kg, with repeatability down to +/-0.008 mm on the Pro.
The high-end 6 DOF motion simulator is published in two models that share one specification table. The standard YT-6DOF carries a maximum load of 800 kg with repeatability of +/-0.02 mm and a motion frequency of 0–5 Hz, controlled over EtherCAT/Modbus. The enhanced YT-6DOF-Pro doubles down on every axis of performance: 2,000 kg maximum load, repeatability of +/-0.008 mm, motion frequency of 0–12 Hz, and a customised industrial protocol interface.
The product's stated core advantages are precision control — 0.01 mm-level positioning accuracy, supporting XYZ-axis translation and rotation composite motion — and modular design: load capacity is customisable from 200 kg to 5 tonnes, with hydraulic and electric dual drive modes supported, so the same platform family covers cockpit cabins, vehicle rigs and research payloads. The product page states certification to ISO 9001 and compatibility with special environmental requirements across aviation, automotive and scientific research applications.
This standalone base belongs to the same six-axis motion class as the simulator line, whose racing, driving and flight systems are each published on their own 6-DOF platforms. Buyers integrating their own cabin or test article should compare the 6 DOF rotational platform for rotation-led work, and read the Stewart platform guide before fixing payload and envelope.
Core advantages on record
- Precision control — 0.01 mm-level positioning; XYZ translation + rotation composite motion.
- Industry-wide adaptation — stated ISO 9001 certification; aviation, automotive and research environments.
- Modular design — customisable load 200 kg–5 t; hydraulic/electric dual drive modes.
Specifications
| Item | Specification on record |
|---|---|
| Maximum load | YT-6DOF: 800 kg | YT-6DOF-Pro: 2,000 kg |
| Repeatability | YT-6DOF: +/-0.02 mm | YT-6DOF-Pro: +/-0.008 mm |
| Motion frequency | YT-6DOF: 0–5 Hz | YT-6DOF-Pro: 0–12 Hz |
| Control interface | YT-6DOF: EtherCAT/Modbus | YT-6DOF-Pro: customised industrial protocol |
What to confirm for your project
- Choose the model by payload plus dynamics: the Pro's 0–12 Hz band matters for vibration-rich cues, not just its higher load.
- State your control protocol at brief stage — EtherCAT/Modbus is standard on the base model, custom protocols are a Pro configuration.
- Ask about minimum order requirements and lead time for your proposed configuration, including any load customisation between 200 kg and 5 t.
Buyer questions
What is the difference between the YT-6DOF and the Pro?
Load (800 kg vs 2,000 kg), repeatability (+/-0.02 mm vs +/-0.008 mm), motion frequency (0–5 Hz vs 0–12 Hz) and interface (EtherCAT/Modbus vs customised industrial protocol).
Can the platform be customised for heavier payloads?
The published modular design supports customisable load capacity from 200 kg to 5 tonnes, with hydraulic and electric dual drive modes.
Which industries is it specified for?
The product page names aviation, automotive and scientific research, with stated ISO 9001 certification and compatibility with special environmental requirements.
Related systems
6 DOF Rotational Platform
Rotation-led composite motion with under 5 ms response delay.
View the system →3 DOF Motion Platform
Three-axis motion at a published hardware cost 50%+ below six-axis.
View the system →None
Tell us the product line, your venue or site conditions, the capacity you need and your target market. Ask about configuration, scope and project terms for your specific project before you commit.
Request a Quote